Skip to content
조회 수 15840 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부

네트워크 성능 측정(트래픽 대량 발생으로 통신속도 측정)

클라이언트와 서버간의 네트워크 대역폭을 체크하는 프로그램이다.
UDP로 체크하면 패킷 유실사항을 확인할 수 있다.

 

 아래 3가지 프로그램에서 가능하네요.

NetPeeker
http://www.net-peeker.com/images/30Stat.png

NetLimiter
http://www.filebuzz.com/software_screenshot/full/32777-netlimiter_2_pro.jpg

Network Traffic Monitor
http://focsw.tistory.com/185

 

iperf-2.0.5-cygwin.zip

TFGen.exe

 

 

1.JPG

 

 

http://vhrms.tistory.com/202

 

 

 

 

A컴퓨터와 B컴퓨터간 사이에 네트워크 대역폭을 측정하는 예를 들어 보겠습니다.


A컴퓨터에 iperf.exe 서버 데몬을 실행시켜 놓습니다. 

(iperf.exe에 -s옵션을 주면 서버가 -c 옵션을 주면 클라이언트가 됩니다.)

 * 서버 데몬 실행 방법 - iperf를 다운 후 임의 위치에 압축 해제 합니다.

                                  command창을  open한 후 해당 위치로 이동합니다.

                                 그리고  iperf.exe -s라고 입력합니다.




B컴퓨터에서 임의 폴더에 iperf를 압축 해제후 command창으로 해당 위치로 이동합니다. 

B컴퓨터에서 다음의 예와 같이 A서버에 서로 통신을 하여 대역폭을 측정합니다.

 

* iperf.exe -c 192.168.1.100  <-- 서버 IP를 입력합니다. 이와 같이 내부 내트워크 IP가 될수도 있고 218.50.112.113등 

                                              공인 IP가 될 수도 있으며 abcd.abc.com 과 같이 도메인도 가능합니다.



제 측정 결과는 서버의 WAN Upload Bandwidth이 45MB이지만 

클라이언트의 WAN Bandwidth가 5MB라서 낮은 Bandwidth가 나와버렷네요..



자세한 메뉴얼은 아래와 같습니다.


                 User Manuals               


NAME

       iperf - perform network throughput tests


SYNOPSIS

       iperf -s [ options ]


       iperf -c server [ options ]


       iperf -u -s [ options ]


       iperf -u -c server [ options ]


DESCRIPTION

       iperf is a tool for performing network throughput measurements.  It can

       test either TCP or UDP throughput.  To perform an iperf test  the  user

       must establish both a server (to discard traffic) and a client (to gen-

       erate traffic).


GENERAL OPTIONS

       -f, --format

              [kmKM]   format to report: Kbits, Mbits, KBytes, MBytes


       -h, --help

              print a help synopsis


       -i, --interval n

              pause n seconds between periodic bandwidth reports


       -l, --len n[KM]

              set length read/write buffer to n (default 8 KB)


       -m, --print_mss

              print TCP maximum segment size (MTU - TCP/IP header)


       -o, --output <filename>

              output the report or error message to this specified file


       -p, --port n

              set server port to listen on/connect to to n (default 5001)


       -u, --udp

              use UDP rather than TCP


       -w, --window n[KM]

              TCP window size (socket buffer size)


       -B, --bind <host>

              bind to <host>, an interface or multicast address


       -C, --compatibility

              for use with older versions does not sent extra msgs


       -M, --mss n

              set TCP maximum segment size (MTU - 40 bytes)


       -N, --nodelay

              set TCP no delay, disabling Nagle's Algorithm


       -v, --version

              print version information and quit


       -V, --IPv6Version

              Set the domain to IPv6


       -x, --reportexclude

              [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings)

              V(server) reports


       -y, --reportstyle C|c

              if set to C or c report results as CSV (comma separated values)


SERVER SPECIFIC OPTIONS

       -s, --server

              run in server mode


       -U, --single_udp

              run in single threaded UDP mode


       -D, --daemon

              run the server as a daemon


CLIENT SPECIFIC OPTIONS

       -b, --bandwidth n[KM]

              set  target  bandwidth to n bits/sec (default 1 Mbit/sec).  This

              setting requires UDP (-u).


       -c, --client <host>

              run in client mode, connecting to <host>


       -d, --dualtest

              Do a bidirectional test simultaneously


       -n, --num n[KM]

              number of bytes to transmit (instead of -t)


       -r, --tradeoff

              Do a bidirectional test individually


       -t, --time n

              time in seconds to transmit for (default 10 secs)


       -F, --fileinput <name>

              input the data to be transmitted from a file


       -I, --stdin

              input the data to be transmitted from stdin


       -L, --listenport n

              port to recieve bidirectional tests back on


       -P, --parallel n

              number of parallel client threads to run


       -T, --ttl n

              time-to-live, for multicast (default 1)


       -Z, --linux-congestion <algo>

              set TCP congestion control algorithm (Linux only)


ENVIRONMENT

       TCP_WINDOW_SIZE

              Controls the size of TCP buffers.


DIAGNOSTICS

       This section needs to be filled in.


BUGS

       Exit statuses are inconsistent.  The threading implementation is rather

       heinous.


AUTHORS

       Iperf  was  originally  written by Mark Gates and Alex Warshavsky.  Man

       page and maintence by Jon Dugan <jdugan at x1024 dot net>.  Other  con-

       tributions  from  Ajay  Tirumala,  Jim Ferguson, Feng Qin, Kevin Gibbs,

       John Estabrook <jestabro at ncsa.uiuc.edu>, Andrew  Gallatin  <gallatin

       at gmail.com>, Stephen Hemminger <shemminger at linux-foundation.org>


SEE ALSO

       http://iperf.sourceforge.net/


NLANR/DAST                        APRIL 2008                          IPERF(1)

로그인 후 댓글쓰기가 가능합니다.

?

List of Articles
번호 분류 제목 날짜 조회 수
80 WindowsTip Iexplorer_익스플로러 오류)0x7c0c5a6c에 있는 명령이 0x7c0c5a6c의 메모리를 참조했습니다. 1 file 2013.02.05 8202
79 WindowsTip 영문XP 한글화 MUI 정보 3 file 2013.02.13 9763
78 WindowsTip 랜카드 전원관리 기능 해제로 인터넷 끊킴 해결방법 1 file 2013.02.13 11070
77 WindowsTip 스윙 브라우저와 크롬 브라우저 비교 file 2013.02.14 8116
76 WindowsTip 윈도우 콘솔(CMD), DIR 명령어 1 2013.02.18 9362
75 WindowsTip SysFader: iexplore.exe - 응용 프로그램 오류 해결방법 1 file 2013.02.23 12360
74 WindowsTip MS-DOS 모드에서 Windows 복원 방법 3 2013.02.26 8178
73 WindowsTip 윈도우 레지스트리 설정 - 인터넷 익스플로러 4 2013.02.28 12915
72 WindowsTip 악성코드 분석 프로그램 정리 2013.03.06 6807
71 WindowsTip XP 원격데스크톱 설정과 실행 1 2013.03.11 8683
70 WindowsTip 네트워크 무선연결이 안될 때의 점검 방법 file 2013.03.12 28251
69 WindowsTip 무선공유기 잦은 끊킴시 해결방법 file 2013.03.15 10748
68 WindowsTip 지정한 IP의 포트스캔 9 file 2013.03.16 8882
67 WindowsTip Process Explorer 불필요한 scvhost.exe 제거하기 2013.03.19 12131
66 WindowsTip 악성코드 언인스톨러 file 2013.03.19 9859
65 WindowsTip SVCHOST.EXE 꼭 필요한 servies.msc 항목 1 file 2013.03.20 8766
64 WindowsTip 구글 음성지원 API 2013.03.22 7357
63 WindowsTip 네트워크에 있는 다른 시스템과 ip 주소가 충돌합니다. 1 file 2013.03.29 38111
62 WindowsTip Windows ARP Spoofing 10 file 2013.03.29 11929
61 WindowsTip html) Google Charts API 활용 그래프 만들기 2013.04.08 9611
Board Pagination Prev 1 2 3 4 5 Next
/ 5

http://urin79.com

우린친구블로그

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소