Skip to content
조회 수 15840 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부

네트워크 성능 측정(트래픽 대량 발생으로 통신속도 측정)

클라이언트와 서버간의 네트워크 대역폭을 체크하는 프로그램이다.
UDP로 체크하면 패킷 유실사항을 확인할 수 있다.

 

 아래 3가지 프로그램에서 가능하네요.

NetPeeker
http://www.net-peeker.com/images/30Stat.png

NetLimiter
http://www.filebuzz.com/software_screenshot/full/32777-netlimiter_2_pro.jpg

Network Traffic Monitor
http://focsw.tistory.com/185

 

iperf-2.0.5-cygwin.zip

TFGen.exe

 

 

1.JPG

 

 

http://vhrms.tistory.com/202

 

 

 

 

A컴퓨터와 B컴퓨터간 사이에 네트워크 대역폭을 측정하는 예를 들어 보겠습니다.


A컴퓨터에 iperf.exe 서버 데몬을 실행시켜 놓습니다. 

(iperf.exe에 -s옵션을 주면 서버가 -c 옵션을 주면 클라이언트가 됩니다.)

 * 서버 데몬 실행 방법 - iperf를 다운 후 임의 위치에 압축 해제 합니다.

                                  command창을  open한 후 해당 위치로 이동합니다.

                                 그리고  iperf.exe -s라고 입력합니다.




B컴퓨터에서 임의 폴더에 iperf를 압축 해제후 command창으로 해당 위치로 이동합니다. 

B컴퓨터에서 다음의 예와 같이 A서버에 서로 통신을 하여 대역폭을 측정합니다.

 

* iperf.exe -c 192.168.1.100  <-- 서버 IP를 입력합니다. 이와 같이 내부 내트워크 IP가 될수도 있고 218.50.112.113등 

                                              공인 IP가 될 수도 있으며 abcd.abc.com 과 같이 도메인도 가능합니다.



제 측정 결과는 서버의 WAN Upload Bandwidth이 45MB이지만 

클라이언트의 WAN Bandwidth가 5MB라서 낮은 Bandwidth가 나와버렷네요..



자세한 메뉴얼은 아래와 같습니다.


                 User Manuals               


NAME

       iperf - perform network throughput tests


SYNOPSIS

       iperf -s [ options ]


       iperf -c server [ options ]


       iperf -u -s [ options ]


       iperf -u -c server [ options ]


DESCRIPTION

       iperf is a tool for performing network throughput measurements.  It can

       test either TCP or UDP throughput.  To perform an iperf test  the  user

       must establish both a server (to discard traffic) and a client (to gen-

       erate traffic).


GENERAL OPTIONS

       -f, --format

              [kmKM]   format to report: Kbits, Mbits, KBytes, MBytes


       -h, --help

              print a help synopsis


       -i, --interval n

              pause n seconds between periodic bandwidth reports


       -l, --len n[KM]

              set length read/write buffer to n (default 8 KB)


       -m, --print_mss

              print TCP maximum segment size (MTU - TCP/IP header)


       -o, --output <filename>

              output the report or error message to this specified file


       -p, --port n

              set server port to listen on/connect to to n (default 5001)


       -u, --udp

              use UDP rather than TCP


       -w, --window n[KM]

              TCP window size (socket buffer size)


       -B, --bind <host>

              bind to <host>, an interface or multicast address


       -C, --compatibility

              for use with older versions does not sent extra msgs


       -M, --mss n

              set TCP maximum segment size (MTU - 40 bytes)


       -N, --nodelay

              set TCP no delay, disabling Nagle's Algorithm


       -v, --version

              print version information and quit


       -V, --IPv6Version

              Set the domain to IPv6


       -x, --reportexclude

              [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings)

              V(server) reports


       -y, --reportstyle C|c

              if set to C or c report results as CSV (comma separated values)


SERVER SPECIFIC OPTIONS

       -s, --server

              run in server mode


       -U, --single_udp

              run in single threaded UDP mode


       -D, --daemon

              run the server as a daemon


CLIENT SPECIFIC OPTIONS

       -b, --bandwidth n[KM]

              set  target  bandwidth to n bits/sec (default 1 Mbit/sec).  This

              setting requires UDP (-u).


       -c, --client <host>

              run in client mode, connecting to <host>


       -d, --dualtest

              Do a bidirectional test simultaneously


       -n, --num n[KM]

              number of bytes to transmit (instead of -t)


       -r, --tradeoff

              Do a bidirectional test individually


       -t, --time n

              time in seconds to transmit for (default 10 secs)


       -F, --fileinput <name>

              input the data to be transmitted from a file


       -I, --stdin

              input the data to be transmitted from stdin


       -L, --listenport n

              port to recieve bidirectional tests back on


       -P, --parallel n

              number of parallel client threads to run


       -T, --ttl n

              time-to-live, for multicast (default 1)


       -Z, --linux-congestion <algo>

              set TCP congestion control algorithm (Linux only)


ENVIRONMENT

       TCP_WINDOW_SIZE

              Controls the size of TCP buffers.


DIAGNOSTICS

       This section needs to be filled in.


BUGS

       Exit statuses are inconsistent.  The threading implementation is rather

       heinous.


AUTHORS

       Iperf  was  originally  written by Mark Gates and Alex Warshavsky.  Man

       page and maintence by Jon Dugan <jdugan at x1024 dot net>.  Other  con-

       tributions  from  Ajay  Tirumala,  Jim Ferguson, Feng Qin, Kevin Gibbs,

       John Estabrook <jestabro at ncsa.uiuc.edu>, Andrew  Gallatin  <gallatin

       at gmail.com>, Stephen Hemminger <shemminger at linux-foundation.org>


SEE ALSO

       http://iperf.sourceforge.net/


NLANR/DAST                        APRIL 2008                          IPERF(1)

로그인 후 댓글쓰기가 가능합니다.

?

List of Articles
번호 분류 제목 날짜 조회 수
100 WindowsTip 윈도우 DLL 오류 해결방법 2013.01.23 192700
99 WindowsTip VBS) FTP.scriptlet and Shell.scriptlet 2013.09.21 48506
98 WindowsTip VBS) PostMessage or SendMessage to external program 2013.09.21 45964
97 WindowsTip 네트워크에 있는 다른 시스템과 ip 주소가 충돌합니다. 1 file 2013.03.29 38111
96 WindowsTip 네트워크 무선연결이 안될 때의 점검 방법 file 2013.03.12 28251
95 WindowsTip Windows-XP 의 [Prefetch] 폴더에 대하여[C:\WINDOWS\Prefetch] 2013.12.04 24630
94 WindowsTip 스마트폰으로 오실로스코프 사용하기(App:OsciPrime Oscilloscope Legacy) file 2013.12.27 23297
93 WindowsTip DLL Injection은 어떻게 이루어지는가? file 2013.05.25 23221
92 WindowsTip An error [-5001 : 0x80070002] ha occurred while running the setup 오류 해결방법 file 2013.06.14 21928
91 WindowsTip 탐색기로 ftp 폴더 바로열기 file 2013.12.03 19640
90 WindowsTip 보안경고 - 안전하게 제공된 콘텐츠만 보시겠습니까? <= 없애는 방법 2013.05.21 17946
» WindowsTip 네트워크 성능 측정(트래픽 대량 발생으로 통신속도 측정) 1 file 2013.01.24 15840
88 WindowsTip 디스크정리 명령어(cleanmgr.exe) 2013.07.31 15702
87 WindowsTip Visual Studio 2015용 Visual C++ 재배포 설치 오류 해결방법 3 file 2016.09.06 15391
86 WindowsTip 가상메모리 클리어로 빠른 부팅하기 12 file 2012.11.23 14946
85 WindowsTip 패킷을 훔치는 ARP Spoofing 공격 탐지 툴과 방어방법 4 2013.01.05 13573
84 WindowsTip 윈도우 레지스트리 설정 - 인터넷 익스플로러 4 2013.02.28 12915
83 WindowsTip SysFader: iexplore.exe - 응용 프로그램 오류 해결방법 1 file 2013.02.23 12360
82 WindowsTip Process Explorer 불필요한 scvhost.exe 제거하기 2013.03.19 12131
81 WindowsTip 네트워크 주소 변환 구성 요소(lpnat.sys)를 사용할수 있는 다른 프로그램 또는 서비스 . . . 2013.08.16 12083
Board Pagination Prev 1 2 3 4 5 Next
/ 5

http://urin79.com

우린친구블로그

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소