Skip to content
조회 수 15840 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부

네트워크 성능 측정(트래픽 대량 발생으로 통신속도 측정)

클라이언트와 서버간의 네트워크 대역폭을 체크하는 프로그램이다.
UDP로 체크하면 패킷 유실사항을 확인할 수 있다.

 

 아래 3가지 프로그램에서 가능하네요.

NetPeeker
http://www.net-peeker.com/images/30Stat.png

NetLimiter
http://www.filebuzz.com/software_screenshot/full/32777-netlimiter_2_pro.jpg

Network Traffic Monitor
http://focsw.tistory.com/185

 

iperf-2.0.5-cygwin.zip

TFGen.exe

 

 

1.JPG

 

 

http://vhrms.tistory.com/202

 

 

 

 

A컴퓨터와 B컴퓨터간 사이에 네트워크 대역폭을 측정하는 예를 들어 보겠습니다.


A컴퓨터에 iperf.exe 서버 데몬을 실행시켜 놓습니다. 

(iperf.exe에 -s옵션을 주면 서버가 -c 옵션을 주면 클라이언트가 됩니다.)

 * 서버 데몬 실행 방법 - iperf를 다운 후 임의 위치에 압축 해제 합니다.

                                  command창을  open한 후 해당 위치로 이동합니다.

                                 그리고  iperf.exe -s라고 입력합니다.




B컴퓨터에서 임의 폴더에 iperf를 압축 해제후 command창으로 해당 위치로 이동합니다. 

B컴퓨터에서 다음의 예와 같이 A서버에 서로 통신을 하여 대역폭을 측정합니다.

 

* iperf.exe -c 192.168.1.100  <-- 서버 IP를 입력합니다. 이와 같이 내부 내트워크 IP가 될수도 있고 218.50.112.113등 

                                              공인 IP가 될 수도 있으며 abcd.abc.com 과 같이 도메인도 가능합니다.



제 측정 결과는 서버의 WAN Upload Bandwidth이 45MB이지만 

클라이언트의 WAN Bandwidth가 5MB라서 낮은 Bandwidth가 나와버렷네요..



자세한 메뉴얼은 아래와 같습니다.


                 User Manuals               


NAME

       iperf - perform network throughput tests


SYNOPSIS

       iperf -s [ options ]


       iperf -c server [ options ]


       iperf -u -s [ options ]


       iperf -u -c server [ options ]


DESCRIPTION

       iperf is a tool for performing network throughput measurements.  It can

       test either TCP or UDP throughput.  To perform an iperf test  the  user

       must establish both a server (to discard traffic) and a client (to gen-

       erate traffic).


GENERAL OPTIONS

       -f, --format

              [kmKM]   format to report: Kbits, Mbits, KBytes, MBytes


       -h, --help

              print a help synopsis


       -i, --interval n

              pause n seconds between periodic bandwidth reports


       -l, --len n[KM]

              set length read/write buffer to n (default 8 KB)


       -m, --print_mss

              print TCP maximum segment size (MTU - TCP/IP header)


       -o, --output <filename>

              output the report or error message to this specified file


       -p, --port n

              set server port to listen on/connect to to n (default 5001)


       -u, --udp

              use UDP rather than TCP


       -w, --window n[KM]

              TCP window size (socket buffer size)


       -B, --bind <host>

              bind to <host>, an interface or multicast address


       -C, --compatibility

              for use with older versions does not sent extra msgs


       -M, --mss n

              set TCP maximum segment size (MTU - 40 bytes)


       -N, --nodelay

              set TCP no delay, disabling Nagle's Algorithm


       -v, --version

              print version information and quit


       -V, --IPv6Version

              Set the domain to IPv6


       -x, --reportexclude

              [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings)

              V(server) reports


       -y, --reportstyle C|c

              if set to C or c report results as CSV (comma separated values)


SERVER SPECIFIC OPTIONS

       -s, --server

              run in server mode


       -U, --single_udp

              run in single threaded UDP mode


       -D, --daemon

              run the server as a daemon


CLIENT SPECIFIC OPTIONS

       -b, --bandwidth n[KM]

              set  target  bandwidth to n bits/sec (default 1 Mbit/sec).  This

              setting requires UDP (-u).


       -c, --client <host>

              run in client mode, connecting to <host>


       -d, --dualtest

              Do a bidirectional test simultaneously


       -n, --num n[KM]

              number of bytes to transmit (instead of -t)


       -r, --tradeoff

              Do a bidirectional test individually


       -t, --time n

              time in seconds to transmit for (default 10 secs)


       -F, --fileinput <name>

              input the data to be transmitted from a file


       -I, --stdin

              input the data to be transmitted from stdin


       -L, --listenport n

              port to recieve bidirectional tests back on


       -P, --parallel n

              number of parallel client threads to run


       -T, --ttl n

              time-to-live, for multicast (default 1)


       -Z, --linux-congestion <algo>

              set TCP congestion control algorithm (Linux only)


ENVIRONMENT

       TCP_WINDOW_SIZE

              Controls the size of TCP buffers.


DIAGNOSTICS

       This section needs to be filled in.


BUGS

       Exit statuses are inconsistent.  The threading implementation is rather

       heinous.


AUTHORS

       Iperf  was  originally  written by Mark Gates and Alex Warshavsky.  Man

       page and maintence by Jon Dugan <jdugan at x1024 dot net>.  Other  con-

       tributions  from  Ajay  Tirumala,  Jim Ferguson, Feng Qin, Kevin Gibbs,

       John Estabrook <jestabro at ncsa.uiuc.edu>, Andrew  Gallatin  <gallatin

       at gmail.com>, Stephen Hemminger <shemminger at linux-foundation.org>


SEE ALSO

       http://iperf.sourceforge.net/


NLANR/DAST                        APRIL 2008                          IPERF(1)

로그인 후 댓글쓰기가 가능합니다.

?

List of Articles
번호 분류 제목 날짜 조회 수
20 WindowsTip Windows 7 인터넷속도 향상시키기 2013.01.25 8991
» WindowsTip 네트워크 성능 측정(트래픽 대량 발생으로 통신속도 측정) 1 file 2013.01.24 15840
18 WindowsTip 네트워크 부하(Offered Load) 관련 Discard Rate 2 2013.01.24 11608
17 WindowsTip imm32.dll 다운 바이러스 오류 해결법(한글이 잘 안써지는 문제 등) 1 file 2013.01.23 8140
16 WindowsTip 윈도우 DLL 오류 해결방법 2013.01.23 192700
15 WindowsTip 100M Full 속도내기(레지스터리) file 2013.01.11 6506
14 WindowsTip 패킷을 훔치는 ARP Spoofing 공격 탐지 툴과 방어방법 4 2013.01.05 13573
13 WindowsTip windows Arp Spoofing Tool 5 2013.01.05 8056
12 WindowsTip 램디스크 설정시 주의사항(끊킴현상 발생시 해당부분 점검필수) 2 file 2012.11.28 10133
11 WindowsTip 삼성노트북 NT300E5C-A15R 드라이버 2012.11.27 8812
10 WindowsTip 가상메모리 클리어로 빠른 부팅하기 12 file 2012.11.23 14946
9 WindowsTip 강력한 백신 avast file 2012.08.07 6981
8 WindowsTip MS 에센셜 정식한글판 (MSE) 2 3 2012.08.07 6725
7 WindowsTip 장치관리자, 네트워크연결의 아이콘이 사라짐 3 2012.08.01 10557
6 WindowsTip 로컬 영역 연결 없어졌을 때 해결 방법 3 file 2012.08.01 11885
5 WindowsTip 도스모드에서 IP 변경하는 방법 2012.07.05 7303
4 WindowsTip TCP/IP Network Communication without extra Tools(DB, 메신저 등등) 2012.07.03 6752
3 WindowsTip 익스플로러 업데이트 안될때의 패치 file 2012.07.02 6066
2 WindowsTip 윈도우 문제 많을때 (레지스트리 초기화???) 2012.05.23 9634
1 WindowsTip 윈도우 Xp에서 사용자 로그온 제거 방법 1 2012.05.18 6292
Board Pagination Prev 1 ... 3 4 5 Next
/ 5

http://urin79.com

우린친구블로그

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소