Skip to content
회로도전자부품
2013.11.06 08:12

아두이노와 1602 LCD 연결

조회 수 15469 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄 첨부

아두이노와 1602 LCD 연결

 

http://cafe.naver.com/makezone/75

 

this is different from the diagram on arduino.cc(just a little bit)

 

#include <LiquidCrystal.h>

// variables for input pin and control LED
int analogInput = 1;//Vout핀 연결
int LEDpin = 13;//프로그램이 동작하는걸 보여준다.
int prev = LOW;
int refresh = 500;
float vout = 0.0;
float vin = 0.0;
float R1 = 9820.0; // 저항 R1

float R2 = 987.0; //저항 R2!

int value = 0;

LiquidCrystal lcd(12, 11, 5, 4, 3, 2);


void setup()

{
    pinMode(analogInput, INPUT);// 핀모드 선언

    pinMode(LEDpin, OUTPUT);// 핀모드 선언   

   Serial.begin(19200);// 시리얼포트 통신 초기
  
    lcd.begin(16, 2);
    
  
}
void loop(){
     value = analogRead(analogInput);// 1번핀 값을 읽음
     if (value >= 1023) {
     Serial.println("MAX!!");
     delay(refresh);
     return;
}
    else if (value <= 0) {
        Serial.println("MIN!!");
        delay(refresh);
        return;
}
if (prev == LOW)

    {
        prev = HIGH;
    }

else {
        prev = LOW;
       }
digitalWrite(LEDpin, prev);//디지털 포트 13번 핀 깜빡이게
vout = (value * 5.0) / 1024.0; //10비트 분해능이므로 1024로 나눠줌
vin = vout / (R2/(R1+R2));//저항분배법칙 으로 계산
Serial.print(vin); //입력되는 전압값 출력

Serial.println(" volt");
lcd.print(vin);
delay(refresh);
}
 

 

 

 

 


// rs on pin 12
// rw on pin 11
// enable on pin 10

 

 

 

ETC_1.PNG ETC_2.PNG

 

회로

Before wiring the LCD screen to your Arduino we suggest to solder a pin header strip to the 14 (or 16) pin count connector of the LCD screen, as you can see in the image above.
To wire your LCD screen to your Arduino, connect the following pins:

  • LCD RS pin to digital pin 12
  • LCD Enable pin to digital pin 11
  • LCD D4 pin to digital pin 5
  • LCD D5 pin to digital pin 4
  • LCD D6 pin to digital pin 3
  • LCD D7 pin to digital pin 2

Additionally, wire a 10K pot to +5V and GND, with it's wiper (output) to LCD screens VO pin (pin3).

click the images to enlarge

 

 

Code Start

 

/*
  LiquidCrystal Library - Hello World
 
 Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
 library works with all LCD displays that are compatible with the
 Hitachi HD44780 driver. There are many of them out there, and you
 can usually tell them by the 16-pin interface.
 
 This sketch prints "Hello World!" to the LCD
 and shows the time.
 
  The circuit:
 * LCD RS pin to digital pin 12
 * LCD Enable pin to digital pin 11
 * LCD D4 pin to digital pin 5
 * LCD D5 pin to digital pin 4
 * LCD D6 pin to digital pin 3
 * LCD D7 pin to digital pin 2
 * LCD R/W pin to ground
 * 10K resistor:
 * ends to +5V and ground
 * wiper to LCD VO pin (pin 3)
 
 Library originally added 18 Apr 2008
 by David A. Mellis
 library modified 5 Jul 2009
 by Limor Fried (http://www.ladyada.net)
 example added 9 Jul 2009
 by Tom Igoe
 modified 22 Nov 2010
 by Tom Igoe
 
 This example code is in the public domain.

 http://www.arduino.cc/en/Tutorial/LiquidCrystal
 */


// include the library code:
#include <LiquidCrystal.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

void setup() {
  // set up the LCD's number of columns and rows:
  lcd.begin(16, 2);
  // Print a message to the LCD.
  lcd.print("hello, world!");
}

void loop() {
  // set the cursor to column 0, line 1
  // (note: line 1 is the second row, since counting begins with 0):
  lcd.setCursor(0, 1);
  // print the number of seconds since reset:
  lcd.print(millis()/1000);
}

Code End

 

 

 

See Also:

 

 

 

 

 

 

 

로그인 후 댓글쓰기가 가능합니다.

?

List of Articles
번호 분류 제목 날짜 조회 수
233 AVR 태양광 전지필름을 이용한 스마트폰 충전기 만들기 2 file 2012.10.31 19486
232 회로도전자부품 크리스탈 라디오 회로(FM 라디오 회로 등) 1 file 2014.03.06 21548
231 회로도전자부품 콘덴서를 이용한 전류조절 2015.10.04 4724
230 회로도전자부품 콘덴서를 연결하는 이유 2013.09.05 8974
229 회로도전자부품 콘덴서(캐패시터) 2013.09.07 9130
228 회로도전자부품 콘덴서(capacitor) 강좌 file 2014.01.22 7772
227 회로도전자부품 코일 / L / 인덕터 2013.11.29 22419
226 회로도전자부품 충전보호회로 file 2013.11.22 16216
225 회로도전자부품 초간단 FM 라디오 file 2014.01.09 7939
224 회로도전자부품 청력테스트 프로그램(가청주파수) file 2013.11.18 13690
223 회로도전자부품 지식채널ⓔ 못 배운 과학자 마이클 페러데이 2014.02.07 6592
222 회로도전자부품 주파수변조(AM,FM,PM) file 2014.03.28 3920
221 회로도전자부품 주파수 필터링 회로 2013.08.11 9476
220 회로도전자부품 주문한 부품 리스트 file 2013.10.26 20733
219 회로도전자부품 종이 스피커 2014.01.11 14734
218 회로도전자부품 제너다이오드 & 브릿지다이오드 file 2013.09.05 17085
217 회로도전자부품 제너 다이오드(zener diode) 사용방법 file 2013.09.23 51017
216 회로도전자부품 정전압회로 분석 file 2013.09.05 20108
215 회로도전자부품 정전압 정전류 회로도 file 2015.09.15 3150
214 AVR 정전압 레귤레이터 1 5 2012.08.11 20357
Board Pagination Prev 1 2 3 4 5 ... 13 Next
/ 13

http://urin79.com

우린친구블로그

sketchbook5, 스케치북5

sketchbook5, 스케치북5

나눔글꼴 설치 안내


이 PC에는 나눔글꼴이 설치되어 있지 않습니다.

이 사이트를 나눔글꼴로 보기 위해서는
나눔글꼴을 설치해야 합니다.

설치 취소